2013年8月21日星期三

Slewing loss and storage

slewing bearing loss factor mainly refers to the use of installation and adjustment, use and maintenance, repair and other maintenance meets the technical requirements. Installation conditions are the primary factors that one of the factors, slewing ring often due to improper installation of the parts of the entire slewing between the force status changes, slewing ring in the abnormal state of operation and losses. According slewing installation, use, maintenance, maintenance of the technical requirements for operation of the rotary bearing to withstand load, speed, temperature, vibration, noise and lubrication condition monitoring and inspection, abnormal should immediately find reasons to be adjusted to normal. Moreover, the quality of the grease and the surrounding medium, and the atmosphere is also very important for analytical testing.
Slewing oiled at the factory and used film wrapped, the packaging rust generally valid 3-6 months. Their storage temperature should be 20 ± 10 ℃, with relative humidity less than 60%, more than valid, it should be timely maintenance. Slewing inventory should be greased after one year, and check its rotation flexibility.
    Slewing bearing factory generally fixed on pallets or containers, with a single piece packaging and packaging into groups of two forms. Transport and storage should be kept level, not collision and extrusion, not rain, storage should be smooth. Slewing ring should be stacked flat between isolation.
    Slewing lifting holes generally can be screwed into safe lifting eyebolts.

没有评论:

发表评论